Skip to content
How to Detect IP Address Conflicts with arp‑scan on Linux
Operations 3 min read

How to Detect IP Address Conflicts with arp‑scan on Linux

This guide explains why IP address conflicts happen, how the arp‑scan tool works to discover duplicate IP assignments on a local network, and provides step‑by‑step commands for installing and running arp‑scan on Ubuntu/Debian and Fedora/CentOS/RedHat systems.

MaGe Linux Operations
MaGe Linux Operations
MaGe Linux Operations

IP addresses identify devices on a network and can be dynamic or static. Conflicts occur when two devices claim the same IP, often due to DHCP issues.

arp‑scan sends ARP packets on the local network to discover which MAC addresses claim each IP, revealing conflicts.

Install arp‑scan:

sudo apt-get install arp-scan
sudo yum install arp-scan

Run the scan (replace eth0 with your interface): sudo arp-scan -I eth0 -l Sample output shows MAC addresses and vendor names; duplicate entries indicate an IP conflict. In the example, 192.168.1.39 appears twice, confirming a conflict.

Original Source

Signed-in readers can open the original source through BestHub's protected redirect.

Sign in to view source
Republication Notice

This article has been distilled and summarized from source material, then republished for learning and reference. If you believe it infringes your rights, please contactadmin@besthub.devand we will review it promptly.

network troubleshootingLinuxDHCPip-conflictarp-scan
Reader feedback

How this landed with the community

Sign in to like

Rate this article

Was this worth your time?

Sign in to rate
Discussion

0 Comments

Thoughtful readers leave field notes, pushback, and hard-won operational detail here.